Skip to content Skip to footer

Attention: Mobility Scooters for Hire Sale Service Melbourne will be closed over the Christmas break for 2024 from 2pm on Friday 20th December, and will resume regular trading hours on Monday 6th January 2025. During this time, we will be open briefly on 30th December, 2024 from 9am – 5pm to handle any pickups and returns.

✖


    Daisy V2 Light Blue

    $13,750.00

    Enquire Now

    DAISY V2 Light Blue, is a second hand Refurbished, all weather enclosed mobility scooter, a very comfortable LEMS, Luxury Enclosed Mobility Scooter. It has been re-painted, and it has a brand-new 60V80Ah Lithium Iron Phosphate battery. It is in good condition.

    DAISY V2 Light Blue, is a great value cabin mobility scooter, great heater / demister for those winter months, and electric windows, sunroof, and rear window, all opening to give great air flow through cooling. And rear-view camera.

    All making this luxury enclosed mobility scooter very comfortable utilitarian mobility for anyone, full of refinement, a luxury enclosed cabin mobility scooter at an affordable price. It is also safer than any other cabin scooter.

    Meets all International requirements for electric motorised mobility transport.

    TGA (Therapeutic Goods Australia) registered in the ARTGA (Australian Register of the TGA).

    As of 20/11/2024, the odometer on the Daisy V2 Light Blue model reads 1526km.

    Description

    DAISY is an advanced, and very comfortable LEMS, luxury enclosed mobility scooter.

    DAISY is only a little larger than other cabin mobility scooters, making this luxury enclosed mobility scooter usable and very comfortable even for the largest person, and it has lots of refinement.

    DAISY has enough power to smoothly drive anywhere you want to go, and at a comfortable speed in the open. The maximum driving range with the LiFePO4 battery is 60km.

    DAISY is an all-weather LEMS, luxury enclosed mobility scooter, fit for a royal.

    CCC / ISO Certification / Approved by TGA (Therapeutic Goods Australia) and registered in the ARTGA (Australian Register of the TGA).

    V2 w/o aircon, 1.5kW, 60V80Ah LITHIUM IRON, 250 kg load, 10/20/30 /kph, 60 km

    The pictures say more than a thousand words.
    Luxury enclosed cabin mobility scooters for the discerning mobility challenged.

    Get on the foot paths / cycle paths / road paths / roads and be mobile, shopping, appointments, and seeing friends.
    Just get in and forget the weather !

    Features

    • Two door
    • Motor cycle steering and controls
    • Maximum range of up to 60 km *
    • Three speed 10/20/30 kph
    • Maintenance Free Lithium Iron Battery
    • Front and rear damping suspension
    • Four wheel disk brakes
    • Four wheel parking brakes
    • Brushless no maintenance DC motor
    • Heavy duty controller
    • Driver weight capacity 250kg
    • CCC / ISO Certification – meets all international standards for electric mobility vehicles

    * Depends on user mass, terrain and battery type and condition, based on 80 kg driver on straight and level smooth hard ground, all things in good condition, and a steady speed.

    Equipment:
    • Motorcycle steering and controls
    • Windscreen wiper with washer
    • Key lock doors
    • Electric windows
    • LCD electronic instrument dashboard
    • Radio, blue tooth, USB, auxiliary
    • MP3 Media display with multi display function
    • Battery capacity gauge
    • Speed display
    • Odometer
    • Speaker
    • Rear vision mirrors
    • Rear view camera
    • Rear plate light
    • Key start / stop
    • Heater / Demister
    • LED lights powerful and elegant
    • High / low beam halogen head lights
    • Fog light
    • Indicators
    • Three electronic maximum speeds
    • Horn
    • Two doors with locking
    • Large skylight opening
    • Rear window opening
    • Large wheels with pneumatic tyres for a good ride
    • Hydraulic disk brakes four wheels
    • Park brakes on all four wheels
    • Sliding / tilting front captain’s seat – comfortable
    • Seatbelt
    • Large space in rear for shopping and goods

    Specifications

    Maker: Xili Vehicle Co

    Model: Daisy V2

    Model Number: HMY

    Certification: CCC / ISO 9001

    Registration TGA / ARTGA

    Colour: Light Blue

    Dimensions: 227 x 110 x 160 cm (L x W x H)

    Weight (total): 323 kg

    Weight without batteries: 289 kg

    Weight capacity: 350 kg

    Driver weight max: 250 kg

    Wheelbase: 154 cm

    Span Rear Wheels: 98 cm

    Body Type: Unitary construction

    Maximum speed: 10 / 20 / 30 kph
    Do not exceed 10 kph on paths with pedestrians

    Maximum range *: Up to 60 km

    Maximum slope *: 14°

    Ground Clearance: 15 cm

    Motor: 60V 1500W brushless DC

    Drive Type: Rear differential

    Braking: Hydraulic disk all wheels

    Parking Brake: 2 / 4 wheels

    Wheels: 400-10

    Suspension: Front and Rear: Integral hydraulic damping

    Tyres: 17×4″ 400-10 Front: 220kPa, Rear: 250kPa

    Battery: 64V 80Ah Lithium Iron

    Battery charger: 73V 10A

    Shipping details (Transporter): 330 kg 226x125x170 cm 4.8 cubic meters

    * Varies with user weight, terrain type, driving style, battery charge, battery condition, temperature, and tyre / wheel type and condition. Information taken from manufacturers specifications.

    Additional Information

    Owners Manual

    Brochure

    Parts – All parts and prices (Service agents nationwide provided at wholesale prices)

    DAISY Motor & Battery Combination

    DAISY has been upgraded to have a Motor and Lithium Battery combination giving exceptional performance.

    DAISY has a 60V DC 1.5 kW Brushless Motor, powerful and efficient.

    DAISY has a 60V 80Ah Lithium Iron Phosphate battery.

    DAISY Lithium battery is so much better than the standard Lead Acid Battery, in many ways, not limited to but including performance and overall driving cost.

    In practice depending on driving style, terrain, load, speed etc, you will get around 60 km distance. With the heater going, you will get less distance. Also, remember Lithium batteries have a short end phase in their power supply, so run out quickly.

    You may charge your battery after each use or charge less frequently if you like.

    For best life – do not go below 20% SOC. This means you have used 80% DOD.
    80Ah*80%=64Ah/10A=6.4Hours. So, charging should not be more than 6.4hrs MAX.

    This battery can also withstand extremes in temperature without damage.
    However, performance is reduced with lower temperature. Be aware of this in winter in cooler climates.

    ALWAYS FULLY CHARGE YOUR FIREFLY BATTERY BEFORE USING FROM NEW.
    RESET ODOMETER TO ZERO if available.

    When in storage, the Lithium FePO4 battery should be charged to full, and make sure the Daisy’s Power / Overload switch is OFF, so there is no chance of accidentally drawing current from the stored battery.
    Check the battery every month to make sure it remains close to full.

    If you accidentally discharge the battery to zero charge, connect the charger and it will recharge the battery.

    This is the LiFePO4 batteries performance vs distance travelled table, as calculated ….
    Daisy LiFePO4 lifetime performance

    Km Recharges Total distance
    7      3000          21,000
    14    1500          21,000
    21    1000          21,000
    30      600          18,000
    35      200            7,500 (est)

    The above data was calculated using a Victron Shunt Energy Analyzer and is an estimate.

    The cost to run this DAISY is about 2 cent/km for electricity, and about 12 cents/km for the battery.

    Please note, this information is as per this particular type of Lithium battery and is not what you may know or be told about other types of Lithium batteries.

    FAQ's

    Does a Mobility Scooter / DAISY need to be registered?
    In Australia you do not register your Mobility Scooter, except for Queensland, and it is registered for ownership only.

    Do I need a driver’s license to drive my DAISY Mobility Scooter?
    You do not need a driver’s license to drive your Mobility Scooter.

    Can I drive my Mobility Scooter / DAISY on the road?
    You may drive your Mobility Scooter / DAISY on a public road if for any reason the footpath is not suitable. You must obey all the rules of a pedestrian or cyclist.

    Can I carry a passenger in my DAISY Mobility Scooter?
    Your DAISY Mobility Scooter is able to accommodate a passenger or two smaller passengers. You and passengers must use the seat belts if on a road. It is recommended to obtain approval from your local authority.

    What materials is the DAISY Mobility Scooter made from?
    The DAISY Mobility Scooter panels are made from ABS, an impact-resistance engineering thermoplastic. The windscreen and windows are made from Tempered Safety Glass, so they will not shatter into shards that cut if broken. The frame construction is unitary, very strong one-piece steel. All to vehicle industry standards.

    How often should I charge my DAISY Mobility Scooter?
    It is best to charge the battery after 50% use.
    When in storage, or not intending to use for more than a week, switch off the Circuit Breaker (Kill Switch / Overload Switch) and charge the battery to full. Check each month and refill if down to 90% SOC.

    What is the average life of a DAISY Mobility Scooter battery?
    The DAISY Lithium Iron Phosphate batteries are able to be charged many thousands of small discharges and fewer deep discharges. See more in Motor and Battery combination.

    How can I check I am charging my DAISY Mobility Scooter at the right time?
    There are many mathematical ways of working this out but for simplicity a rough estimation is as the battery is 80Ah, so 50%SOC is 40Ah/10A charger, it should take 4hr to fill (recommended)
    at 80%DOD or 20%SOC (minimum recommended) amount uses is 64Ah/10A=6.4hr.
    If you think it easier and want to, you may charge a LiFePO4 battery after each use.

    Why is a Lithium battery so much better than a Lead-Acid battery?
    Firstly, the voltage platform is higher for a Lithium battery, and thus there is more power produced by the motor, and more consistently.
    Secondly, the power available (power density) is much greater, making the battery much lighter, and thirdly the power is able to be delivered much faster.
    Lastly, the ideal temperature for all batteries is 25 C. Temperature limits are, for Lead Acid 0-+35 C, for the DAISY Lithium FePO4 battery it is -20-+50 C. Temperatures over 35 C damage lead acid batteries.

    Is the DAISY Mobility Scooter battery safe ?
    Everyone by now has heard of Lithium battery fires occurring. All of the fires can be accounted for due to many individual factors that are not the norm in the use of any original lithium battery with the correct charger.
    This DAISY Li Iron Phosphate battery is the safest of any Lithium Battery and are almost impossible to burn.

    What is the running cost of a DAISY Mobility Scooter?
    The electric power cost for the DAISY is approximately 5 cents/km.
    As in all electric mobility devices, it is the cost of the battery that is the expensive part.
    The total running cost of a FIREFLY HB is about 23 cent/km plus any servicing.

    Can I use other batteries in my DAISY?
    You could use another type of battery in your DAISY, but the Lithium Iron Phosphate supplied, or a Ternary battery are the best for the job, as explained in the answers above.
    We recommend to only install the correct battery available from your dealer or directly from Mobility Scooters for Hire Sale Service.

    What is the service schedule for DAISY?
    Your DAISY requires a service every year or 1000km.
    Change the differential oil with SAE 80W-90 gear oil.
    Use 3in1 oil on all joints and moving parts.
    Wash with running water and a very soft cloth or brush, and wipe as required with a damp soft cloth. Do not use detergents or other cleaners, they are not required. Never wipe in a dry condition, as the dust and sand will scratch surfaces. A UV Protectorant polish is highly recommended to use on a monthly basis after washing as it will help protect the paint covering from Australia’s harsh sun’s UV damage.

    What is the correct way to connect the power to the charger?
    Operation Instructions :
    Connect outlet plug of the charger to the DAISY.
    Connect the inlet plug of the charger to AC power socket, and when or if connected, turn the power switch on.
    When the indicator light is RED it is charging (sometimes this maybe flashing at around one second intervals). When GREEN it is fully charged.
    Charging time is proportional to the power required to fully charge the battery, and that is what was used since the last charging.
    To disconnect the charger, turn off or remove the charger input plug from the AC power supply.
    Remove the charger outlet plug from the DAISY.

    Notes :
    Do not use outside in the sun, rain or damp
    Do not use in dusty conditions
    Do not place on inflammable materials
    Do not drop
    Ensure the correct charger is used for correct battery type and capacity.
    Some chargers have different colour light sequences, please check and note when first using.

    Videos

      Enquire Now

        Contact Us